Wood particle boards for general and special purposes are made by hot pressing of wood particles mixed with a binder. Wood particle boards are produced on the “Schenk” molding and pressing line, equipped with the “Becker-Van-Hullen” press (Germany). In 2004, the products were certified for compliance with the international standard requirements ISO 9001-2001, in 2005 they were certified according to the international standards of the ISO14000 series, in 2009 the occupational health and safety management system was introduced, meeting the requirements
of OHSAS-18001: 1999, NEQ.
Technological wood raw materials, sawdust and shavings are used as a raw feedstock. А low-toxic carbamide-formaldehyde KF-NFP resin is used аs a binder. The binder also includes a hardener based on ammonium sulfate and additives that reduce the emission of formaldehyde from finished plates, giving the plates special properties, the composition of which is protected by patents.
Wood particle boards GOST 10632-2007 “Particle board. Technical specifications” P-A grades, polished (for the production of furniture, in construction, in mechanical engineering, radio equipment and in the production of packaging);
Wood particle boards PS-A brands are intended for use in residential and civil construction for the production of built-in furniture, window boards, wall panel elements, floor coverings, formwork panels, temporary structures.
Wood particle boards GOST 10632-2007 grades P-A, (B) with increased moisture resistance, sanded. Thanks to special additives, they have increased resistance to both atmospheric moisture and moisture present in the place of use of products made of special-purpose plates.
Laminated pressed wood-fiber board laminated with decorative films chipboard grade P-A of all thicknesses, and increased moisture resistance. Laminated boards have a matte surface, a wide range of decors.
The use of a thin MDF/HDF board provides ease of operation, as the material is easily sawn and milled. The plate can be used raw, or painted in any desired color. This material is made by dry continuous pressing of sawdust and shavings with the addition of a binding element – carbamide-formaldehyde resin. The finished product has a double-sided smoothness, which allows you to apply different coverings on both sides. Either a solid color paint or an imitation of a wood structure is used as a covering. Thin MDF/HDF board can have a different degree of gloss: from matte to superglaze.
Any color options are possible as agreed with the customers. Standard solid colors:
Standard wood color:
This plate is used in furniture and door production, works of decoration, and transport packaging production.
The thin MDF/HDF plate is a guarantee of convenience and efficiency of the workflow!
Width — 1220, 2440 mm,
Length — 1700-3050 mm,
Thickness — 2-6 mm,
Density — 800-900 kg / m3,
Humidity — 3-5%,
Swelling in 24 hours — 45%,
Bending strength — 37 N / mm2 (MDF-30), 30 (MDF-40) N/mm2,
Tensile strength — 0.4 N / mm2 (MDF-30), 0.35 N/mm2 (MDF-40),
Formaldehyde emission class E1 — less than 8mg/100g, E0. 5 — less than 5mg/100g.