Wood particle boards for general and special purposes are made by hot pressing of wood particles mixed with a binder. Wood particle boards are produced on the “Schenk” molding and pressing line, equipped with the “Becker-Van-Hullen” press (Germany). In 2004, the products were certified for compliance with the international standard requirements ISO 9001-2001, in 2005 they were certified according to the international standards of the ISO14000 series, in 2009 the occupational health and safety management system was introduced, meeting the requirements
of OHSAS-18001: 1999, NEQ.

Technological wood raw materials, sawdust and shavings are used as a raw feedstock. А low-toxic carbamide-formaldehyde KF-NFP resin is used аs a binder. The binder also includes a hardener based on ammonium sulfate and additives that reduce the emission of formaldehyde from finished plates, giving the plates special properties, the composition of which is protected by patents.

Wood particle boards GOST 10632-2007 “Particle board. Technical specifications” P-A grades, polished (for the production of furniture, in construction, in mechanical engineering, radio equipment and in the production of packaging);

Wood particle boards PS-A brands are intended for use in residential and civil construction for the production of built-in furniture, window boards, wall panel elements, floor coverings, formwork panels, temporary structures.

Wood particle boards GOST 10632-2007 grades P-A, (B) with increased moisture resistance, sanded. Thanks to special additives, they have increased resistance to both atmospheric moisture and moisture present in the place of use of products made of special-purpose plates.

Laminated pressed wood-fiber board laminated with decorative films chipboard grade P-A of all thicknesses, and increased moisture resistance. Laminated boards have a matte surface, a wide range of decors.

Thin chipboard plate is a material with a thickness of 6-8 mm, which has high tensile and warping strength. Thin chipboard plate is made by hot pressing ultra-thin wood shavings wood shavings mixed with a low-toxic carbamide-formaldehyde binder. Thin chipboard plate has a low formaldehyde emission class — E1, which makes this material safe for health and appropriate for the production of environmentally friendly furniture, containers and packaging.

Thin chipboard plate is taking care of your health!

Width — 1220 mm,
Length — 2440 mm,
Thickness — 6-8 mm,
Density — 660-740 kg / m3,
Humidity — 5-13%,
Bending strength — 12-14 MPa,
Tensile strength — 0.28-0.31 MPa,
Surface roughness after grinding — 40 microns,
Formaldehyde emission class E1 — less than 8 mg/100.