LUMBER is a marketable product in various fields: from construction to furniture production. The use of different types of lumber depends on the type of work. The range includes coniferous materials from spruce and pine from 1 to 4 grades according to STB 1713-2007.

Made of softwood lumber.

The wood moisture content of the parts is 12+-3%.
The roughness of milled surfaces Rmax for transparent and opaque coating is not more than 125 microns for front surfaces, not more than 200 microns for non-face surfaces.

They are made of softwood lumber on the equipment of the company ” Weinig “(Germany) with the use of woodworking tools of the company” Leite ” (Germany).

Plinth

The wood moisture content of the parts is 12±3%.
The roughness of the milled surfaces is Rmax — 200 microns.
The product is certified.

Наличник облицованный дубовым шпоном, тип Н-1, 13х74.
Наличник Н-2-1, 44х13.
Влажность древесины: 12±3%.
Шероховатость поверхностей Rmax – не более 125 мкм под прозрачное и непрозрачное покрытие лицевых поверхностей, не более 200 мкм – для нелицевых поверхностей.
Изделия сертифицированы.

Type P — 1, thickness 26 mm, width 54 mm, width 75 mm.
Surface roughness under the transparent covering of the handrail Rmax — no more than 125 microns under the transparent and non-transparent covering of the front surfaces, no more than 200 microns for back surfaces.
The products are certified.

0-3 thickness 16 mm, width 45 to 120 mm,
0-3-1 (semicircular), thickness 22 mm
0-3-2 thickness 22 mm
0-3-4 (beveled), thickness 22 mm
0-3-6, (bevelled), thickness 22 mm
0-3-7, (bevelled), thickness 20 mm,
0-3-1 (straight),
0-5-1 thickness 12 mm
0-5-2 thickness 20 mm
0-5-3 thickness 27 mm,
0-5-4 thickness 16 mm,
0-5-5 thickness 12 mm, width 60-100 mm.
Humidity 12±3% for indoor products, 15±3% for outdoor products.
Roughness of milled surfaces Rmax — 200 microns for non-face surfaces, not more than 125 microns for front surfaces for transparent and opaque coating.
The product is certified.